Skip to product information
RV BEDLIFT KITS
RV BEDLIFT KITS

RV BEDLIFT KITS

$70.99
Product Description

Make under-bed RV storage access easy with Bedlift Kits from Hatchlift Products. Each kit includes all the necessary equipment and hardware for installation on both sides of an RV bed mattress platform.

Kits include two (2) gas springs/struts, two (2) wood spacer blocks, one (1) complete set of mounting hardware and one (1) complete set of installation instructions.

NOTE: Will Not Fit bunk or fixed base beds in slide outs (deck, mattress and base must slide together). Side-load and radius corner applications vary by setup and may not fit all applications, contact us with any questions.

Size Chart

View Size Chart

Videos

RV Bedlift Kits FAQs

The gas springs won't compress.

Bedlift gas springs are under pressure and cannot be compressed manually. The mattress and all bedding must be in place to properly operate the lifting ability of the spring.
The gas springs will not retract.

After installation, the bedlift will not close unless the mattress and all bedding is in place.
We installed the bedlifts and the bed won't go down.

Make sure you ordered the correct size Bedlift Kit. The correct size will include the proper gas spring needed.

Other trouble-shooting ideas to consider:

  • When the Bedlift Kit was installed, was the vertical measurement from the floor to the bottom of the bed 39"?
  • Ensure the mattress and all bedding are in place before trying to operate the Bedlift.
  • Have you tried adjusting the Bedlift per the instructions?

After verifying the installation is correct and the bed still will not close, contact us at info@hatchlift.com. Please include a picture of the installation, size and configuration of the bed and we will try and troubleshoot the problem.
I have a bulkhead in the middle of the compartment.

In most cases these are not structural and can be notched to accomodate the gas spring. If you are not sure, contact the manufacturer.
I have partial platform bed with radius corners

Depending on the size of the radius and the depth of the compartment, you may need to order a smaller size kit for the application. For assistance, please contact us at info@hatchlift.com
I ordered the wrong kit

Email us at info@hatchlift.com with your order number and the size you need. We will send the correct gas springs at no charge. Please include your shipping information. After you have completed the installation, return the incorrect gas springs to: Hatchlift Products, 36 Road 6332, Kirtland, NM 87417.

Related Products